You Are Here: Home ยป Uncategorized ยป How To Set Up Cantilever Outdoor PAtio Umbrella

How To Set Up Cantilever Outdoor PAtio Umbrella

If you recently purchased an outdoor umbrella and found that the instructions are impossible to understand. Here is a easy guide on how to set up a cantilever outdoor patio umbrella in 6 easy steps.

HOW TO SET UP CANTILEVER OUTDOOR PATIO UMBRELLA

HOW TO SET UP CANTELEVER OUTDOOR PATIO UMBRELLA

I was looking for an OUTDOOR UMBRELLA that would cover the entire area of my patio. There are many kinds of umbrella and sizes. Table, cantilever, wooden, base and push up /lift umbrella. After doing some research I decided I wanted a cantilever umbrella. The biggest part that you must order separately and does not come with the umbrella is a base weights that can be filled with water or sand for those windy days.

Parts of The Cantilever outdoor patio umbrella

Stand: The base of the stand comes in two parts. Which are attached with screws and a connector.

Crank Lift: The crank lift is easy to insert into a opening on the canopy and pole.

UV Resistent Canopy

2 poles: One pole goes into the stand and the other pole is connected to the canopy which goes into the other pole.

diagram of a cantilever umbrellaHOW TO SET UP CANTILEVER OUTDOOR PATIO UMBRELLA

Connecting all the parts of the outdoor patio umbrella

  1. When you are putting the umbrella together make sure you have all the parts laid out outside. Find a location where you want the umbrella place. I found a space in the corner right by the barbecue area. Since that is where I will be entertaining the most.

2: Put together the stand which comes with a connector. Place stand first on the floor, insert the pole that is not connected to the canopy in the stand.

Stand for cantilever umbrella:

3.: Take the weights and fill with water or sand.

4: Place the weights inside the stand, they will fit perfectly.

5. Inset the canopy pole, and make sure the canopy covers the area you are sitting. Insert the crank and test out that the canopy is opening up where you want it.

6. The holes along the the poles are to position the canopy the way you want. There are angles or straight across.

Different angles for cantilever umbrella HOW TO SET UP CANTILEVER OUTDOOR PATIO UMBRELLA

I truly love this umbrella, The quality is great and all the parts were intact. It does come with a diagram of parts and where each go, but no descriptions which was my only complaint. I hope this post will help you understand the cantilever more easily.

For similar posts:

7 Simple Ways To Transform Your Outdoor Spaces.

How To Make An Outdoor Tile Table

How To Refinish Outdoor Furniture

How To refinish Outdoor Cushions

Pin This For LAter

HOW TO SET UP CANTILEVER OUTDOOR PATIO UMBRELLA

10 Comments

  1. Hi Maria! I have actually been trying to figure out what to do with our patio. I think this may be a perfect fit, thank you for sharing ๐Ÿ™‚ Hope you are well.

  2. Oh gosh, I wish I’d had these instructions when we tried to set ours up. I swear my hubby was going to throw that thing in the trash ๐Ÿ˜€

  3. Hey Maria,
    I was struggling while installing my cantilever umbrella, especially with the stand. I was tipping over again and again.
    Thanks for this guide. I just installed it properly.

  4. Bob wehde says:

    Help me install the weighted please

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.